[1] J. Lee, S. Kim, P. Lee and B. Kim, "A Study on Reducing Condensation of Corrugated Steel Plate Magazine," J. Architectural Institute Korea Planning & Design, Vol. 27, No. 6, pp. 85–92, 2011.
[2] H. Jeon, S. Yoon and J. Sohn, "Effect on Condensation Prevention in Igloo-Shaped Ammunition Depot by Forced Ventilation Using Fan in Summer," J. Korean Society Living Environmental System, Vol. 15, No. 2, pp. 257–269, 2008.
[3] B. Ryoo, B. Kim and J. Yoo, "Storage Humidity Management Method of Missiles," Proc. Korean Society Propulsion Engineers, Fall Conference, pp. 687–690, 2016.
[4] J. F. Dunnigun, "How to Make War," William Morrow Company, New York, p. 3121982.
[5] J. Lee, S. Park and B. Kim, "An Analysis of the Surface Condensation of Stored Ammunition in a Igloo-Magazine with Using Numerical Method," J. Architectural Institute Korea Planning & Design, Vol. 22, No. 11, pp. 297–304, 2006.
[6] J. Lee, S. Park and B. Kim, "The Reform Measure for Reduce to Surface Condensation of Ammunition in Igloo Magazine," J. Architectural Institute Korea Planning & Design, Vol. 23, No. 3, pp. 215–222, 2007.
[7] J. Lee and B. Kim, "The Reform Measure for Reduction of Condensation in Igloo Magazine by Computational Fluid Dynamics," J. Architectural Institute Korea Planning & Design, Vol. 24, No. 6, pp. 337–346, 2008.
[8] S. Park, S. Yoon and J. Sohn, "Forced Ventilation Method for Preventing Surface Condensation of Magazine of Igloo Type in Summer," J. Korea Institute Ecological Architecture Environment, Vol. 10, No. 2, pp. 57–62, 2010.
[9] Korea Army, Ammunition Support Command. The Results of Test for the Reduction of Condensation, 2019.
[10] Ansys, Inc."ANSYS FLUENT Theory Guide," Pennsylvania, USA, 2013.
[11] J. O. Hinze, "Turbulence," McGraw-Hill Publishing Company, New York, 1975.
[12] T. H. Shih, W. W. Liou, A. Shabbir, Z. Yang and J. Zhu, "A New
k-ε Eddy-Viscosity Model for High Reynolds Number Turbulent Flows – Model Development and Validation," Computers & Fluids, Vol. 24, No. 3, pp. 227–238, 1995.
[13] Ansys, Inc."ANSYS FLUENT 18.0 in Workbench User's Guide," Pennsylvania, USA, 2017.
[14] J. P. Van Doormaal and G. D. Raithby, "Enhancements of the Simple Method for Predicting Incompressible Fluid Flow," Numerical Heat Transfer, Vol. 7, No. 2, pp. 147–163, 1984.