J. KIMS Technol Search

CLOSE


J. KIMS Technol > Volume 21(6); 2018 > Article
Journal of the Korea Institute of Military Science and Technology 2018;21(6):894-903.
DOI: https://doi.org/10.9766/KIMST.2018.21.6.894   
A Study on Accelerated Life Testing Model and Design
Daeyu Kim, Jangwook Hur, Buil Jeon
1Department of Mechanical System Engineering, Kumoh National Institute of Technology
2Development Program Management Division, Korea Aerospace Industries
헬기용 와이퍼 조립체의 가속모델 및 가속수명시험 설계 연구
김대유, 허장욱, 전부일
1금오공과대학교 기계시스템 공학과
2한국항공우주산업 개발사업관리본부
Abstract
In the case of helicopters, the development of parts technology is rapidly changing, and the complexity is rapidly increasing. Particularly, the surge of various electric and electronic systems is recognized as a problem that is directly related to the safety of the helicopter. Due to these problems, there is a growing interest in reliability evaluation in the face of the problem of confirming and certifying the reliability of parts in the development stage. In this paper, the analysis of the failure mechanism of the wiper system was carried out, and the priority and importance of each failure mode were checked by using the results, and major stress factors were derived and the corresponding acceleration model was selected. Also, the accelerated lifetime test time was calculated according to the life test time, acceleration status and acceleration level of the steady state by using the selected acceleration model and characteristic values.
Key Words: Wiper Assembly, Failure Mode Effect & Analysis, Fault Tree Analysis, Reliability Test, Accelerated Life Test


ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
FOR CONTRIBUTORS
Editorial Office
160 Bugyuseong-daero 488beon-gil, Yuseong-gu, Daejeon 34060, Korea
Tel: +82-42-823-4603    Fax: +82-42-823-4605    E-mail: kimst@kimst.or.kr                

Copyright © 2021 by The Korea Institute of Military Science and Technology.

Developed in M2PI

Close layer
prev next