| Deformation of STS Cup for EFI Detonator in High Velocity Impact |
|
Seok-Bong Kim, Yo-Han Yoo |
| 탄두 충돌 시 기폭관 컵의 변형 해석 |
|
김석봉, 유요한 |
|
국방과학연구소 |
|
|
| Abstract |
|
In this paper, we have investigated deformation of cup for EFI detonator in high velocity impact test. The experimental result shows that STS cup deformed 0.170 mm with the bulged shape. The numerical simulation result with static/dynamic material properties of SUS304 shows 0.166 mm of deformation. The main parameters to decrease the deformation of cup are stength, thickness and density of cup. The initial condition of SUS304 cup was strength of 215 MPa and thickness of 0.12 mm. As strength increases to 500 MPa, deformation of cup converges to 0 mm, and as thickness increases to 0.18 mm, deformation of cup converges to 0 mm. If the density of cup decreases from 8 to 2.7 g/cc, the deformation of cup decreases to 0.141 mm. |
| Key Words:
Exploding Foil Initiator, EFI, HNS Explosive, Impact, Penetration |
|
PDF Links
Full text via DOI
Download Citation
